ReadyMadeRC
NEX N.E.O QUAD FRAME KIT (BOSCAM HD-19 CAMERA MOUNT)
Highlights:, , Specification:,
NEX N.E.O Airframe with the Boscam HD-19 Camera Mount High ...ReadyMadeRC
NEX N.E.O QUAD FRAME KIT (GOPRO CAMERA MOUNT)
Highlights:, , Specification:,
NEX N.E.O Airframe with the GoPro Camera Mount High Quality ...ReadyMadeRC
NEX AIRCRAFT BRUSHLESS GIMBAL
| Includes | All Aluminum gimbal |
Our spec:, Matte Black anodized finish (as opposed to natural silver),
NEX Aircraft Brushless Gimbal Complete brushless gimbal package for the ...ReadyMadeRC
DJI PHANTOM LANDING STRUT EXTENSION SET
| with included stainless steel hardware | 36.2g |
:, ,
Product Description Add a full inch of height and four ...ReadyMadeRC
PHANTOMOUNT X2 C/F 2 AXIS GIMBAL FOR DJI PHANTOM
,
Product Description The PhantoMount X2 Gimbal frame and mounting plate ...ReadyMadeRC
CC3D PROTECTIVE CASE (WITH HARDWARE)
,
Introducing the perfect case for the CC3D control board! - ...ReadyMadeRC
ZEISS SMART PHONE HDMI ADAPTER KIT
,
Smart Phone HDMI adapter Kit This adapter kit is made ...ReadyMadeRC
DJI NAZA-M V2, MAIN CONTROLLER, PMU LED, NO GPS
| What’s new with the NAZAM V2 | Hardware |
| What’s new with the NAZAM V2 | Firmware and functions |
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
Can not be back-ordered. PMU V2 - New case design ...ReadyMadeRC
DJI NAZA-M V2 MULTIROTOR AUTOPILOT W/GPS
| What’s new with the NAZAM V2 | Hardware |
| What’s new with the NAZAM V2 | Firmware and functions |
| Motor Disarm | There are two modes of Motor Disarm |
| VU Input | 7.4V ~ 26.0 V |
| Output(V-SEN port red wire) | 3A@5V |
| (burst current | 7.5A) |
| MAX | 3.15W(0.25A@12.6V) |
| Normal | 1.638W(0.13A@12.6V) |
| Vertical | ±0.8m |
| Horizontal | ±2.5m |
| PMU | 28g |
| GPS | 27g |
| LED | 13g |
| PMU | 39.5mm x 27.5mm x 10.0mm |
| LED | 25mm x 25mm x 7.0mm |
| Notice | Flight Performance can be effected by mechanical performance and payloads |
Features:, All-in-one Design, It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger., Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:, In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：, There are four ways to start the motors, see the following picture:, When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors., Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience and supports double spring TX; every time you let go of the throttle stick it will hover., MC:4.8V~5.5V, MC:27g, MC: 45.5mm x 32.5mm x 18.5mm,
PMU V2 - New case design with CANBUS port. Enhanced ...ReadyMadeRC
DJI BLUETOOTH ADAPTER FOR NAZA
| Working Temperature | -10℃~+50℃ |
| Communication Distance | 50m |
| Weight | 17g |
| Power Consumption | 240mw(0.04A@6V) |
Notices:,
BTU Module The Naza-M now provides assistant software for iPhone4s, ...ReadyMadeRC
RMRC 3 IN 1 - 5A UBEC, POWER DISPLAY, & VOLTAGE ALARM
| Output | 5v or 6v(Selectable via dip switch) 5A continuous, 7.5A burst |
| Input | (3S, 4S, or 6S Lipo) |
| Low Voltage Alarm | 3.7 or 3.5v per cell |
| Alarm LED | 0.2W on board & 1W on plug |
| Size | 70x27x13 mm |
| Weight | 34g with included cables |
Specifications:, ,
High quality Ready Made RC, LLC 5A UBEC w/ Noise ...ReadyMadeRC
PARKFLYER SWITCH-MODE BEC
| Input voltage | 6V to 33.6V (2s-8s lithium, up to 21 NiMHs) |
| Output current | 1.25A continuous, 1.5A 60 second peak (6 4-9g servos, 4 standard servos) |
| Weight | 6.2g/.22oz |
| Weight without wires | 4.1g/.14oz |
Weight:, 6.2g / 0.22oz, Model:, ParkBEC, Specifications:, Applications:, Parkflyers,
Product cannot be back-ordered. (no wires) 4.1g / 0.14oz Product ...ReadyMadeRC
PARKFLYER SWITCH-MODE BEC 6V
| Input voltage | 8V to 33.6V (3s-8s lithium, up to 21 NiMHs) |
| Output current | 1.25A continuous, 1.5A 60 second peak (6 4-9g servos, 4 standard servos) |
| Weight | 6.5g/.23oz |
| Weight without wires | 4.4g/.16oz |
Weight:, 6.5g / 0.23oz, Model:, ParkBEC 6V, Specifications:, Applications:, Parkflyers,
(no wires) 4.4g / 0.16oz Product Description The ParkBEC 6V ...ReadyMadeRC
SPORTBEC SWITCH-MODE BEC
| Input voltage | 9V to 33.6v (3s-8s lithium, up to 21 NiMHs) |
| Output current | 3.5A (~8 standard servos, 4-6 digital) |
| Weight | 13g/.46oz (including wires) |
Price:, $29.99, Weight:, (with wires) 13g / .46oz, Model:, SportBEC, Specifications:, Applications:, Sport aircraft,
SportBEC is the higher capacity version of our best-selling ParkBEC ...ReadyMadeRC
PICOSWITCH - RADIO CONTROLLED RELAY
| Max relay voltage | 60VDC, 125VAC |
| Max relay current | 1A @ 24VDC, 0.5A @ 125VAC (60W lightbulb) |
| Relay resistance | 100 mΩ max |
Weight:, 7.6g / 0.27oz, Specifications:, Note: PicoSwitch has a maximum voltage rating of 125VAC, meaking it unsuitable for toggling 220VAC applications., Diagrams:, , Dimensions:, 0.75" x 0.62" x 0.62", Applications:, Control of lighting systems on RC planes, boats, cars.,
Product Description PicoSwitch is a relay switch that you toggle ...